My Binding Challenge Spartan 150M Manuel d'instructions télécharger pdf (Page 11)

6.0 Operation

IMPORTANT: DO NOT ATTEMPT TO OPERATE THE CUTTER UNTIL

YOU HAVE THOROUGHLY READ AND UNDERSTAND ALL OF THE FOLLOWING

INSTRUCTIONS. CALL YOUR AUTHORIZED CHALLENGE DEALER IF YOU STILL HAVE ANY

QUESTIONS.

Figure 3 – Machine Controls

6.1 Main Power

Power is enabled when the A/C adapter is plugged in and when the connector is plugged into the

soc

ket at the back, left table (Figure 4). The display and line light are switched on at this time.

Figure 4 – Connect Power to the Machine

Front

Shield

Backgauge

Hand Crank

Backgauge

Position Display

Knife Latch

Lever

Cutting Lever

Clamp Handle

Cutting Lever Handle

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Pas de commentaire

My Binding Challenge Spartan 150M Manuel d'instructions Page 11