My Binding Standard PC II- Guide de l'utilisateur télécharger pdf (Page 247)

Trimmer options

When using the Trimmer options, always consider the following:

• Booklets exiting/leaving the SquareFold Trimmer Module may contain trim

remnants/scraps from the previously trimmed booklet. This is due to static electricity

build-up and is normal. If booklets contain trim remnants/scraps, simply remove and

discard them.

• The Trimmer feature can be switched on or off based on user preference. When the

feature is switched on, you can adjust the trim setting in 0.1 mm/0.0039 in. increments

depending on your requirements for the finished booklet job.

Note

For the remainder of this section, the machine's UI screen is shown. The individual print

server and print driver screens are not shown. The descriptions given for each of the

Trimmer options are applicable for network print jobs, and apply to any print server/print

driver connected to the machine.

1. Select the buttons to decrease or increase the trimmer setting. Adjustments are

made in 0.1 mm/0.0039 inch increments.

2. The trimmer setting is based on:

• The number of sheets in the finished booklet,

• The finished booklet width size (such as 8.5 in./210 mm or 5.5 in./149 mm),

• The media type (for example coated/uncoated, glossy), and

• The media weight

Note

Important! You may have to experiment with various settings in order to determine the

best settings for your particular job. Also, you may want to run one or more test prints

before running larger jobs in order to ensure the best possible booklet output.

14-7Xerox

Color 550/560/570 Printer

User Guide

SquareFold Trimmer Module

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 273 274

Pas de commentaire

My Binding Standard PC II- Guide de l'utilisateur Page 247